How to Root Samsung Galaxy A30 SM-A305GN Android 10. It uses TWRP 3.4.0.0. It may be work for Galaxy A30 SM-A305F, SM-A305FN, SM-A305G, SM-A305GN, SM-A305YN, SM-A3050, SM-A305N, SM-A305GT. After flash TWRP Recovery you can Install custom ROM. Read notes / Warning on the bottom of this post before flashing TWRP on your Samsung Galaxy A50s. Use it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!
Downloads
- Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
- Enable OEM unlock and USB debugging options ( Settings -> Developer options )
- Make sure the bootloader are unlocked, If not read How to unlock Bootloader Galaxy A30 Android 10
- Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
- Download and Install Samsung Mobile Phone Drivers
- Download TWRP_3.4.0.0_A30_A10.tar
- Download custom kernel boot_a30_v14.6_by_minhker98.img
- Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
- Download Magisk-v20.4.zip
- Copy Magisk-v20.4.zip and Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip to SD Card ( Recommended )
Flashing TWRP 3.4.0.0 and Root Galaxy A30 Android 10:
- Make sure the bootloader are unlocked, OEM unlocking option is grey out
- Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
- Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
- Flashing TWRP_3.4.0.0_A30_A10.tar as AP in ODIN,
- Click Start button
- Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
- DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
- Select Install ( If image file in SD Card: Select Storage – Micro SD card – OK ) – Install Image – select boot_a30_v14.6_by_minhker98.img – thick “boot” and Swipe to confirm flash
- Select Wipe -> Format data, type ‘yes’ and confirm
- Select Install ( If file in SD Card: Select Storage – Micro SD card – OK ) – select Disable_Dm-Verity_ForceEncrypt_01.14.2020.zip Swipe to confirm Flash
- Select Install Magisk-v20.4.zip, Swipe to confirm flash
- Select Reboot – System
- Setup the Phone
- Connect to Internet and make sure OEM unlocking option appears and grey out
- Open Magisk Manager
- Done!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again.
Notes / Warning!
- Use at your own risk, I’m not responsible for bricking your device.
- Using the incorrect file may brick your device.
- If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
- If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
- If your device storage is encrypted, Rooting will wipe your data !
- If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
- Make sure to backup your important data before root it.
Watch this video:
How to Root Samsung Galaxy A30 Android 10, Fixed vbmeta Error
Tags: Android 10, Root A30 Android 10, Root A30 SM-A305F, root A30 SM-A305GN, Samsung Galaxy A30, Twrp for A30 Android 10