How to Flash TWRP 3.6.0 for Samsung Galaxy J7 Prime SM-G610F. The TWRP 3.6.0 work for Galaxy J7 Prime SM-G610F Android 8.1.0 Oreo. TWRP bug: can not mount Micro SD Card, so you must copy twrp and Disable_Dm-Verity to internal storage. After installed TWRP you can root it or flashing custom rom. Use at your own risk, I’m not responsible for bricking your device.
Download TWRP for Samsung Galaxy J7 Prime SM-G610F
- Extract (unzip) the firmware file ( AP, BL, CP, CSC )
- Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
- Enable OEM unlock and USB debugging options ( Settings -> Developer options )
- Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
- Download and Install Samsung Mobile Phone Drivers
- Download twrp-3.6.0_9-on7xelte.tar
- Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
How to Flash TWRP for Samsung Galaxy J7 Prime SM-G610F
- Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
- Enable OEM unlock and USB debugging options ( Settings -> Developer options )
- Enter Download Mode: Turn Power off the phone, Press and hold Volume Down key + Home key then press and hold Power key, Release all key when Download Mode / Odin Mode appears then Press and release Volume Up key
- Connect phone to Computer
- Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
- Flashing twrp-3.6.0_9-on7xelte.tar as AP in ODIN, then click start.
- DO NOT SKIP THIS STEP! To get out of Download mode and Enter TWRP Recovery mode: Press and hold Volume Down + Home key + then Power key and when the screen blanks quickly press and hold press Volume Up + Home key and Power key. Release all keys when Galaxy J7 Prime logo appears.
- Select Wipe -> Format data, type ‘yes’ and confirm
- Copy Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip to phone.
- Select Install – Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip, Swipe to confirm Flash. You must install this file to avoid boot loop and Decrypt data partition.
- Select Reboot to System
- Done
Read : How to Root Samsung Galaxy J7 Prime SM-G610F with Magisk v24.1
Watch This Video!
Warning!
- Use at your own risk, I’m not responsible for bricking your device.
- Using the incorrect file may brick your device.
- If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
- If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
- If your device storage is encrypted, Rooting will wipe your data !
- If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
- Make sure to backup your important data before root it.