Site icon Recovery-Mode.com

Flashing Android 9 Pie on Samsung Galaxy Xcover 4s SM-G398FN

How to Flash Android 9 Pie on Samsung Galaxy Xcover 4s SM-G398FN. The Android 9 Pie firmware for Galaxy Xcover 4s SM-G398FN are available for download, for firmware detail you can see it below. It also available for some countries, you can visit free download for Galaxy Xcover 4s SM-G398FN firmware. If you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is some of the Android 9 Pie firmware, you can download it according to your country at the link above.

Galaxy Xcover 5 SM-G398FN FTM G398FNXXU1ASG2 9 2019-07-17 16082526
Galaxy Xcover 5 SM-G398FN ORS G398FNXXU1ASG2 9 2019-07-17 16082526
Galaxy Xcover 5 SM-G398FN OPV G398FNXXU1ASG2 9 2019-07-17 16082526
Galaxy Xcover 5 SM-G398FN VDC G398FNXXU1ASF5 9 2019-07-12 16082526

Update Android 8.1.0 Oreo on Galaxy Xcover 4s SM-G398FN

  1. Extract (unzip) the firmware file.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key + Home key then press and hold Power key, Release all key when Download Mode / Odin Mode appears then Press and release Volume Up key )
  6. Connect the phone to PC with USB Cable Data
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk

Exit mobile version