Site icon Recovery-Mode.com

Update Samsung Galaxy J3 Prime SM-J327W to Android 8.1.0 Oreo

androidhowto@youtube

Update Samsung Galaxy J3 Prime SM-J327W to Android 8.1.0 Oreo. The Android Oreo firmware for Galaxy J3 Prime SM-J327W are available for download, for firmware detail you can see it below. It also available for some countries, you can visit free download for SM-J327W firmware. If you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 8.1.0 Oreo firmware, you can download it according to your country at the link above.

Model SM-J327W
Model name Galaxy J3 Prime
Country Canada
Version Android 8.1.0
Changelist 14556405
Build date Mon, 15 Oct 2018 07:21:41 +0000
Security Patch Level 2018-10-01
Product code RWC
PDA J327WVLU2BRJ4
CSC J327WOYA2BRJ4

Update Android 8.1.0 Oreo on Samsung Galaxy J7 Perx SM-J727P :

  1. Free download Galaxy J3 Prime SM-J327W Android 8.1.0 Oreo. Extract (unzip) the firmware file.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key + Home key then press and hold Power key, Release all key when Download Mode / Odin Mode appears then Press and release Volume Up key )
  6. Connect the phone to PC with USB Cable Data
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you failed flash Android Oreo on your Samsung Galaxy Phone, read this post “Flashing Android 8 Oreo using Patched Odin 3.13.1”

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk

Exit mobile version