Site icon Recovery-Mode.com

Update Samsung Galaxy Note9 SM-N960W to Android 9 Pie

androidhowto@youtube

Update SM-N960W to Android 9 Pie Samsung Galaxy Note9. The Android 9 Pie firmware for Galaxy Note9 SM-N960W are available for download, for firmware detail you can see it below. It also available for some countries, you can visit free download Android 9 Pie for Galaxy Note9 SM-N960W firmware and look for Android OS version.

if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 9 Pie firmware, you can download it according to your country at the link above.

Galaxy Note9 SM-N960W Pie(Android 9) February 07, 19 Canada (XAC) N960WVLU1CSAA
Galaxy Note9 SM-N960W Pie(Android 9) February 07, 19 Canada (SPC) N960WVLU1CSAA
Galaxy Note9 SM-N960W Pie(Android 9) February 07, 19 Tanzania (SOL) N960WVLU1CSAA
Galaxy Note9 SM-N960W Pie(Android 9) February 07, 19 Unknown (MTB) N960WVLU1CSAA
Galaxy Note9 SM-N960W Pie(Android 9) February 07, 19 Canada (Rogers) (RWC) N960WVLU1CSAA
Galaxy Note9 SM-N960W Pie(Android 9) February 07, 19 Canada (Telus) (TLS) N960WVLU1CSAA

How to update Android 9 Pie on Samsung Galaxy Note9 SM-N960W :

  1. Extract (unzip) the firmware file.
  2. Download Odin http://odindownload.com/SamsungOdin/
  3. Extract Odin ZIP file
  4. Open Odin
  5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key + Bixby key then press and hold Power key, Release all key when Download Mode / Odin Mode appears then Press and release Volume Up key )
  6. Connect the phone to PC with USB Cable Data
  7. Wait until you get a blue sign in Odin
  8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
  9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
  10. Click the start button, sit back and wait few minutes

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

  1. Make sure to backup your data, It will erase all the data.
  2. Make sure the firmware is match with your Samsung Galaxy model number
  3. Make sure to ticked F.Reset Time and Auto-Reboot only
  4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
  5. If your device rooted, flashing firmware will unroot it.
  6. Do this with your own risk

Exit mobile version