How to Root Galaxy A50 SM-A505F with Magisk v22 and TWRP v3.5.0 ( One UI 2.5 BUB5-U7 Android 10 ). The TWRP v3.5.0 for Galaxy A50 OneUI 2.5. Build number BUB5 firmware: Android security patch level: 1 February 2021. It may be works for SM-A505F, SM-A505FN, SM-A505G, SM-A505GN. The TWRP comes with Magisk Patched with magisk ( Root ) and without Magisk. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
- Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
- Enable OEM unlock and USB debugging options ( Settings -> Developer options )
- Make sure the bootloader are unlocked, If not read How to unlock Bootloader
- Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
- Download and Install Samsung Mobile Phone Drivers
- Download Latest Magisk Manager
- Download TWRP_v3.5.0_A505_BTL1.tar, use this if you want to install TWRP only
- Download TWRP_v3.5.0_A505_BTL1_Magisk.tar, use this if you want to root.
- Download multidisabler-samsung-2.6.zip or latest
Flashing TWRP v3.5.0 and Root Galaxy A50 BUB5 firmware Android 10 Q :
-
- Make sure the bootloader are unlocked, OEM unlock option is grey out
- Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
- Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
- Flashing TWRP_v3.5.0_A505_BTL1_Magisk.tar as AP in ODIN, then click start.
- Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
- DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
- Select Wipe -> Format data, type ‘yes’ and confirm
- Copy multidisabler-samsung-2.6.zip to phone, ignore this if you copied to SD Card
- Select Install – select multidisabler-samsung-2.6.zip Swipe to confirm Flash
- Select Reboot to System
- When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
- Setup the phone
- Connect Phone to Internet and Make sure the bootloader are unlocked, OEM unlock option is grey out. Don’t restart the phone if you don’t see it.
- Make sure the bootloader are unlocked, OEM unlock option is grey out
Rooting if necessary
-
- Install and Open Magisk Manager, Restart the phone If you stuck on the Magisk Manager installer and Re-install it again.
- Enter TWRP recovery : Turn Power Off. Press and hold Volume Up key + Power Key, When SAMSUNG logo appears release Power Key only, keep pressing Volume Up key until TWRP recovery appears.
- Select Reboot to – Recovery
- Make sure the phone Connected to Internet
- Open Magisk Manager, Cancel all “Requires Additional Setup”, Update Magisk Manager and Update Magisk then Select Reboot.
- Done! You can use Root Checker to check it, Enjoy!
Watch This Video!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy A50.
Notes / Warning!
- Use at your own risk, I’m not responsible for bricking your device.
- Using the incorrect file may brick your device.
- If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
- If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
- If your device storage is encrypted, Rooting will wipe your data !
- If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
- Make sure to backup your important data before root it.