How to Root Samsung Galaxy A50 SM-A505F CUE4-U8 Firmware Android 11. The TWRP Recovery support Galaxy A50 One UI 3.1 Android 11 firmware, Android security patch level: 1 June 2021. It may be works for SM-A505F, SM-A505FN, SM-A505G, SM-A505GN. The TWRP 3.5.0 comes with Magisk Patched. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!
Downloads
- Enable Developer Options: go to Settings -> About device -> Software information. Tap 7 times on Build number to enable Developer options.
- Enable OEM unlock and USB debugging options ( Settings -> Developer options )
- Make sure the bootloader are unlocked, If not read How to unlock Bootloader
- Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
- Download and Install Samsung Mobile Phone Drivers
- Download Latest Magisk Manager
- Download TWRP_v3.5.0_A505_A11_Magisk.tar
- Download multidisabler_samsung.zip
Flashing TWRP v3.5.0 and Root Galaxy A50 CUE4-U8 firmware Android 11 :
-
- Make sure the bootloader are unlocked, OEM unlock option is grey out
- Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
- Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
- Flashing TWRP_v3.5.0_A505_A11_Magisk.tar as AP in ODIN, then click start.
- DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Appears.
- Select Wipe -> Format data, type ‘yes’ and confirm
- Copy multidisabler_samsung.zip to phone, ignore this if you copied to SD Card
- Select Install – select multidisabler_samsung.zip Swipe to confirm Flash
- Select Reboot to System
- When SAMSUNG logo appears wait for a few minutes or more then press and hold volume down + power key until the screen blank
- Setup the phone
- Connect Phone to Internet and Make sure the bootloader are unlocked, OEM unlock option is grey out. Don’t restart the phone if you don’t see it.
- Make sure the bootloader are unlocked, OEM unlock option is grey out
Rooting if necessary
-
- Enter TWRP Recovery Mode: Turn power off, Connect the phone with a USB cable, Press and hold Volume Up + Power Key until TWRP Recovery Mode Appears.
- Select Reboot to Recovery
- Connect Phone to Internet
- Open Magisk
- Install Magisk app and Open it. Magisk will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
- Done
Watch This Video!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy A50.
Notes / Warning!
- Use at your own risk, I’m not responsible for bricking your device.
- Using the incorrect file may brick your device.
- If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
- If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
- If your device storage is encrypted, Rooting will wipe your data !
- If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
- Make sure to backup your important data before root it.