How to root Samsung Galaxy A50 SM-A505G BTC4 firmware Android 10 Q using TWRP root method. It may be works for other variants SM-A505FN, SM-A505GN, SM-A505G, SM-A505GT, SM-A505FM, SM-A505YN. This Root method use TWRP and Magisk patched. Read notes / Warning on the bottom of this post before perform root your Samsung Galaxy A50. Take it your own risk! Follow the instruction carefully and Make sure to backup all your important data!
Step by step Rooting Samsung Galaxy A50 SM-A505G Android 10 Q BTC4 firmware
- Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
- Enable OEM unlock and USB debugging options ( Settings -> Developer options )
- Make sure the bootloader are unlocked, If not read How to unlock Bootloader
- Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
- Download and Install Samsung Mobile Phone Drivers: http://developer.samsung.com/technical-doc/view.do?v=T000000117
- Download Latest Magisk Manager ( MagiskManager-v7.5.1.apk )
- Download TWRP_A505_QQ_BTC4.tar ( magisk included ) original page on xda-developer you can find the link on the page.
- Download multidisabler-samsung-2.2.zip
Rooting Galaxy A50 SM-A505G Android 10 Q BTC4 firmware:
-
- Make sure the bootloader are unlocked, OEM unlock option is grey
- Enter Download Mode : Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data/factory reset and confirm then Select Reboot to bootloader.
- Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
- Flashing TWRP_A505_QQ_BTC4.tar as AP in ODIN,
- Connect to the phone to computer, then click start.
- Magisk is now successfully flashed to your device! Several steps before you can properly use the device.
- DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
- Select Wipe -> Format data.
- Copy multidisabler-samsung-2.2.zip to phone
- Install multidisabler-samsung-2.2.zip
- Select Reboot to Recovery ( If you stuck on Samsung logo, enter TWRP and reboot to system )
- Setup the phone
- Enter TWRP and Reboot to Recovery
- Connect the phone to Internet wait for a moment, make sure OEM unlock option is grey
- Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
- Done! You can use Root Checker to check it, Enjoy!
- Warning! If you got stuck on Samsung Logo, Please read this post How to Flash TWRP without Stuck on Samsung Logo.
- Make sure the bootloader are unlocked, OEM unlock option is grey
If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy A50 SM-A505F.
Notes / Warning!
- Use at your own risk, I’m not responsible for bricking your device.
- Using the incorrect file may brick your device.
- If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
- If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
- If your device storage is encrypted, Rooting will wipe your data !
- If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
- Make sure to backup your important data before root it.
Watch this video:
Tags: Android 10 Q, BTC4 Firmware, Magisk Root, Root Galaxy A50, Root SM-A505G, Samsung Galaxy A50, TWRP for Galaxy A50, TWRP for SM-A505G
no me sirvio todo instala pero el zip de magisk no ni por magisk y tampoco por el twrp