Site icon Recovery-Mode.com

TWRP 3.6.2 for Redmi Note 9 Pro Miatoll devices

How to Flash TWRP 3.6.2 for Redmi Note 9 Pro. It works for all miatoll devices ( curtana, excalibur, gram and joyeuse). Working: Decryption, Vibration, OTG, MTP, Sideloading, Backups and Restores, FastbootD, everything else. It does not work with MediaTek Redmi Note 9. Use it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!

Download: TWRP 3.6.2 for Redmi Note 9 Pro

  1. The bootloader must be unlocked, If not watch this video https://youtu.be/H_gNrIWftIU
  2. Download TWRP: recovery.img copy to your adb folder to make it easy and I renamed it to twrp360miatoll.img
  3. Download Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip
  4. Download Magisk: Magisk-v23.0.apk or latest, rename it to Magisk-v23.0.zip, you can copy it to external recommended. You need install magisk to make TWRP installed permanently on your phone.

Install Instructions: TWRP 3.6.2 for Redmi Note 9 Pro

In Stock ROM

  1. Make sure the bootloader unlocked
  2. Enable USB Debugging in Developer Options
  3. Enter Fastboot Mode: Turn power off, Press and hold Volume Down + Power key until Fastboot mode appears
  4. Open CMD command, run as Administrator
  5. enter adb folder ( cd adb folder )
  6. Connect phone to computer
  7. type “fastboot flash recovery twrp360miatoll.img”
  8. Disconnect Phone from computer
  9. Enter TWRP Recovery first time: Press and Hold Volume Up + Power key, When Redmi logo appears release all keys
  10. Install Magisk-v23.0.zip or latest ( to make TWRP permanent )
  11. Select Reboot – System
  12. Done

In Custom ROM

  1. Enter Fastboot Mode: Turn power off, Press and hold Volume Down + Power key until Fastboot mode appears
  2. Open CMD command, run as Administrator
  3. enter adb folder ( cd adb folder )
  4. Connect phone to computer
  5. type “fastboot flash recovery twrp360miatoll.img”
  6. Press and Hold Volume Up + Power key, When Redmi logo appears release all keys
  7. Install Magisk-v23.0.zip or latest ( to make TWRP permanent )
  8. Select Reboot – System or Recovery
  9. Done

How to flash rom using TWRP 3.6.2

Root Instructions if necessary

Watch this video!

Enter TWRP Recovery

You can enter TWRP recovery with 2 methods: via adb command by type “adb reboot recovery” and by pressing keys combinations ( Turn power off, press and hold volume up + Power key, when POCO logo appears release power key, keep pressing volume until TWRP recovery appears )

Notes / Warning!

  1. Use at your own risk, I’m not responsible for bricking your device.
  2. Using the incorrect file may brick your device.
  3. Make sure to backup your important data before root it.

Exit mobile version