Update Samsung Galaxy J7 Prime SM-G610F to Android 7 Nougat

Update Samsung Galaxy J7 Prime SM-G610F to Android 7.0 Nougat. The Android Oreo firmware for Galaxy J7 Prime SM-G610F are available for download, for firmware detail you can see it below. It also available for some countries, you can visit free download Android 7.0 Nougat SM-G610F firmware. and Free download Android 8.1.0 Oreo for J7 Prime SM-G610F.

if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 7.0 Nougat firmware, you can download it according to your country at the link above.

GALAXY J7 Prime SM-G610F 7.0 December 25, 17 India (INS) G610FXXU1BQL9
GALAXY J7 Prime SM-G610F 7.0 July 09, 18 Israel (ILO) G610FDDU1BRD1
GALAXY J7 Prime SM-G610F 7.0 June 28, 18 Kenya (AFR) G610FDDU1BRD1
GALAXY J7 Prime SM-G610F 7.0 March 22, 18 Singapore (XSP) G610FDXU1BRB3
GALAXY J7 Prime SM-G610F 7.0 June 28, 18 Nigeria (ECT) G610FDDU1BRD1
GALAXY J7 Prime SM-G610F 7.0 November 30, 17 Singapore (MM1) G610FDXU1BQK2

How to install Android 7 Nougat on Samsung Galaxy J7 Prime SM-G610F :

1. Extract (unzip) the firmware file.
2. Download Odin http://odindownload.com/SamsungOdin/
3. Extract Odin ZIP file
4. Open Odin
5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key and Home key, While pressing these keys press and hold Power key, Release all key when Download Mode / Odin Mode appears )
6. Connect the phone to PC with USB Cable Data, then Press and release Volume Up key
7. Wait until you get a blue sign in Odin
8. Add the firmware file to AP / PDA
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes

Update Samsung Galaxy J7 Prime SM-G610F to Android 8.1.0 Oreo

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

If you upgrade the firmware using the firmware that is not from your region, and you get an error message. That means the firmware is not suitable for your Samsung.

If the firmware can not be upgraded to your device It means, they do not support your device. All the impact is its own responsibility

Sample screenshot ODIN

Tags: Android 7 Nougat, firmware update, Galaxy J7 Prime SM-G610F, stock rom