Firmware update: Samsung Galaxy On7 SM-G600F Android 6.0.1 Marshmallow. The firmware available for downloading http://www.sammobile.com/firmwares/database/SM-G600F/. You can download your Samsung Galaxy On7 SM-G600F firmware at the page, available for some countries. How to Root for Samsung Galaxy On7 SM-G600F is the separated post, this post only for upgrading to Android 6.0.1 Marshmallow.
Firmware details below is one of the Android 6.0.1 Marshmallow firmwares, you can download it according to your country at the link above.
Model SM-G600F
Model name
Country Turkey
Version Android 6.0.1
Changelist 8409147
Build date Mon, 27 Jun 2016 00:03:26 +0000
Security Patch Level 2016-06-01
Product code TUR
PDA G600FXXU1APF9
CSC G600FOJV1APF9
How to install Android 6.0.1 Marshmallow on Samsung Galaxy On7 SM-G600F :
- Extract (unzip) the firmware file. Download at http://www.sammobile.com/firmwares/database/SM-G600F/
- Download Odin v3.09
- Extract Odin ZIP file
- Open Odin v.3.09
- Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key and Home key, While pressing these keys press and hold Power key, Release all key when Download Mode / Odin Mode appears )
- Connect the phone to PC with USB Cable Data, then Press and release Volume Up key
- Wait until you get a blue sign in Odin
- Add the firmware file to AP / PDA
- Make sure re-partition is NOT ticked
- Click the start button, sit back and wait few minutes
If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares
Warning!
If you upgrade the firmware using the firmware that is not from your region, and you get an error message. That means the firmware is not suitable for your Samsung.
If the firmware can not be upgraded to your device It means, they do not support your device. All the impact is its own responsibility
Sample screenshot ODIN
Tags: Android 6.0.1 Marshmallow, firmware update, Galaxy On7 SM-G600F
this image does not work! when Downloading… the error message on the device (SM-G6000) is:
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
____________________________________________________
On the PC Terminal/Host the error message on log is:
Odin engine v(ID:3.1101)..
File analysis..
SetupConnection..
Initialzation..
Set PIT file..
DO NOT TURN OFF TARGET!!
Get PIT for mapping..
Firmware update start..
SingleDownload.
aboot.mbn
NAND Write Start!!
FAIL! (Auth)
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
aboot.mdn seems to be SUSPECT, can anybody HELP?
The model number SM-G6000 does not match with SM-G600F firmware. You must download the SM-G6000 firmware, Don’t flashing if the firmware does not match with your model number. It will brick your device.