Update Samsung Galaxy Xcover 4 SM-G390F to Android 8.1.0 Oreo

Update Samsung Galaxy Xcover 4 SM-G390F to Android 8.1.0 Oreo. The Android Oreo firmware for Galaxy Xcover 4 SM-G390F are available for download, for firmware detail you can see it at https://www.sammobile.com/firmwares/SM-G390F/. If you can not download it from the website. You can try download it from alternative webs on updato.com and samsung-firmware.org and no need registered. It also available for some countries.

if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update. Firmware details below is one of the Android 8.1.0 Oreo firmware, you can download it according to your country at the link above.

Model SM-G390F
Model name Galaxy Xcover 4
Country United Kingdom
Version Android 8.1.0
Changelist 14164118
Build date Tue, 21 Aug 2018 12:06:52 +0000
Security Patch Level 2018-08-01
Product code EVR
PDA G390FXXU2BRH3
CSC G390FEVR2BRI1

Update Android 8.1.0 Oreo on Samsung Galaxy Xcover 4 SM-G390F :

1. Extract (unzip) the firmware file. Download at https://www.sammobile.com/firmwares/SM-G390F/ ( Not Free ) If it does not work try to download it from updato.com or samsung-firmware.org with and no need registered.
   
2. Download Odin http://odindownload.com/SamsungOdin/
3. Extract Odin ZIP file
4. Open Odin
5. Reboot Phone in Download Mode ( Turn Power off the phone, Press and hold Volume Down key + Home key then press and hold Power key, Release all key when Download Mode / Odin Mode appears then Press and release Volume Up key )
6. Connect the phone to PC with USB Cable Data
7. Wait until you get a blue sign in Odin
8. Add the firmware files AP, BL, CP and CSC. If the firmware comes with single file, insert it on the AP only.
9. In Option make sure to ticked F.Reset Time and Auto-Reboot only
10. Click the start button, sit back and wait few minutes

If you failed flash Android Oreo on your Samsung Galaxy Phone, read this post “Flashing Android 8 Oreo using Patched Odin 3.13.1”

If you got Boot Loop after update samsung firmware read this How to Fix Boot Loop After Update Samsung Android Firmwares

Warning!

1. Make sure to backup your data, It will erase all the data.
2. Make sure the firmware is match with your Samsung Galaxy model number
3. Make sure to ticked F.Reset Time and Auto-Reboot only
4. if you get error message “SECURE CHECK FAIL: BOOTLOADER” when flashed the ROM, try to use the newest version of the firmware update.
5. If your device rooted, flashing firmware will unroot it.
6. Do this with your own risk

Tags: Android 8.1.0 OREO, Android 8.1.0 Oreo for SM-G390F, firmware update, flashing rom, Galaxy Xcover 4 SM-G390F, stock rom