How to flash TWRP 3.5.0_9-0 on Samsung Galaxy M30s Android 10 Q. This TWRP version is official release v3.5.0_9-0 for Samsung Galaxy M30s. Original TWRP Recovery 3.5.0 release does not included custom vbmeta that needs to be flashed to disable the verification of custom mods. If you want to root your device you must patch Magisk into TWRP. I have patched magisk and repack custom vbmeta. Read notes / Warning on the bottom of this post before perform root your Samsung Galaxy M30s. Use it at your own risk! Follow the instruction carefully and Make sure to backup all your important data!
Download:
- Enable Developer Options: go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
- Enable OEM unlock and USB debugging options ( Settings -> Developer options )
- Make sure the bootloader are unlocked, If not read How to unlock Bootloader M30s
- Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
- Download and Install Samsung Mobile Phone Drivers: http://developer.samsung.com/technical-doc/view.do?v=T000000117
- Download Latest Magisk Manager ( if you want to root )
- Download TWRP 3.5.0_9-0 ( No Magisk )
- Download TWRP 3.5.0_9-0 ( Magisk patched: download this if you want to root )
- Download Disable_Dm-Verity_ForceEncrypt_xx.xx.2020.zip
Flashing TWRP 3.5.0_9-0 instructions
-
- Make sure the bootloader is unlocked, OEM unlocking option is grey out
- Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
- Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
- Flashing twrp-3.5.0_9-0-m30s.img.tar or twrp-3.5.0_9-0-m30s_Magisk.tar as AP in ODIN,
- Click Start.
- TWRP Recovery is now successfully flashed to your device! Several steps before you can properly use the device.
- DO NOT SKIP THIS STEP! Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when Samsung Logo appears release Power key only, keep pressing Volume Up key until TWRP Recovery Mode Appears.
- Select Wipe -> Format data, type “yes” and confirm
- Install Disable_Dm-Verity_ForceEncrypt_01.14.2020.zip
- Select Reboot to System
- When Samsung Logo appears Wait for a moment, then force restarting by Pressing and Hold Volume Down + Power until the screen blank.
- Setup the phone
- Connect the Phone to Internet
- Make sure OEM unlock option is grey out if you want to reboot it!
- Make sure the bootloader is unlocked, OEM unlocking option is grey out
Rooting ( twrp-3.5.0_9-0-m30s_Magisk.tar )
-
- Enter TWRP Recovery Mode: Turn power off; Press and hold Volume Up key + Power key, when samsung logo appears release power key only, keep pressing volume up until TWRP recovery appears
- Select Reboot – Recovery
- Install Magisk Manager. Magisk Manager will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
- Done! You can use Root Checker to check it, Enjoy!
If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy M30s.
Notes / Warning!
- Use at your own risk, I’m not responsible for bricking your device.
- Using the incorrect file may brick your device.
- If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
- If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
- If your device storage is encrypted, Rooting will wipe your data !
- If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
- Make sure to backup your important data before root it.
Watch this video :
Tags: official TWRP for M30s, root M30s, Samsung Galaxy M30s, TWRP Recovery