TWRP 3.7.0 for Samsung Galaxy A50 A505x Update: 20221026

TWRP 3.7.0 for Samsung Galaxy A50 A505x Update: 20221026. TWRP 3.7.0 is built by TenSeventy7, No need reboot recovery for rooting and Restarting phone will not lose rooting. It may be works for SM-A505F, SM-A505FN, SM-A505G, SM-A505GN but tested on SM-A505F variant only, let me know if it works for other variants. Use it at your own risk! Follow the instructions carefully and Make sure to backup all your important data!

Download: TWRP 3.7.0 for Samsung Galaxy A50

• Enable Developer Options: go to Settings -> About device -> Software information. Tap 7 times on Build number to enable Developer options.
• Enable OEM unlock and USB debugging options ( Settings -> Developer options )
• Make sure the bootloader are unlocked, If not read How to unlock Bootloader
• Download and Extract ODIN v3.13.1 from https://odindownload.com/SamsungOdin/
• Download and Install Samsung Mobile Phone Drivers
• Download TWRP_v3.7.0-Unofficial_a50-1666700564.tar
• Download multidisabler-samsung-3.1.zip

Flash Instructions: TWRP 3.7.0 for Samsung Galaxy A50

1. 1. Make sure the bootloader are unlocked, OEM unlock option is grey out
      
   2. Enter Download Mode : Turn Power Off. Press and hold Volume Up + Volume Down key together, while pressing these keys, connect the phone to computer, then press volume up once.
   3. Open ODIN, IMPORTANT!: Uncheck “Auto Reboot” in Options!
   4. Flashing TWRP_v3.7.0-Unofficial_a50-1666700564.tar as AP in ODIN, then click start.
   5. DO NOT SKIP THIS STEP! Don’t remove USB Cable, let it connected. Press and hold Volume Down + Power Key, when the screen blank quickly press and hold Volume Up + Power key, when yellow tri-angel appears release power key only, keep pressing volume up until TWRP Recovery Mode appears
   6. Copy multidisabler-samsung-3.1.zip to phone, ignore this if you copied to SD Card
   7. Select Install – select multidisabler-samsung-3.1.zip, Swipe to confirm Flash
   8. Select Wipe -> Format data, type ‘yes’ and confirm
   9. Select Reboot to Recovery or System
      
   10. Done

Rooting if necessary

• Download Mint Kernel it depends on your android version ( android 11/12) and system ( OneUI or AOSP ).  For rooting: Don’t use “NoRoot”
• Enter TWRP Recovery, Install the Mint Kernel, Reboot – System
• Connect Phone to Internet
• Install Magisk app and Open it. Magisk will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
• Done

Watch This Video!

If something goes wrong and you want to unroot it, just flash the ROM to make it works again. Read How to flash Galaxy A50.

Notes / Warning!

1. Use at your own risk, I’m not responsible for bricking your device.
2. The flashable TWRP is only for Android 11 OneUI
3. Using the incorrect file may brick your device.
4. If your target device has a custom firmware flash counter, Rooting will trigger it. If you’re lucky, Triangle Away has support for your device and can be used to reset the counter.
5. If you have a KNOX-enabled device, Rooting will trip the KNOX WARRANTY VOID status !
6. If your device storage is encrypted, Rooting will wipe your data !
7. If you have locked bootloaders, flashing one of these will probably brick your device – with the exception of Nexus devices, which will usually automatically “OEM unlock” and wipe your data !
8. Make sure to backup your important data before root it.

Tags: android 11, Android 12, AOSP, custom recovery, OneUI, Root Galaxy A50, Samsung Galaxy A50, TWRP 3.7.0, TWRP 3.7.0 for A50, TWRP for A50

One comment on “TWRP 3.7.0 for Samsung Galaxy A50 A505x Update: 20221026”

1. I missed download the multidisabler-samsung-3.1.zip what should I do

   Reply